+  Optical Modem
+  PDH Optical Multiplexer
+  Multi service Optical Machine
+  EOS
+  Video Optical Transmission Series
+  Interface Converter
+  E1 Channel Protection Switching
+  media Converter
+  Convergent type bridge server
+  Serial Data Server
+  Centralized platform
+  Active WDM Equipment
+  Passive WDM system
+  Auxiliary equipment
+  DTS
+  EPON
+  PTN
+  PCM
    TOM-C04E 4E1 PDH Optical Multiplexer     TIC-E102 E1 channel protection switching     TIC-2014-TX E1/ETH Interface Converter
Interface Converter
TIC-2014-TX E1/ETH Interface Converter

Product introduction:
      TIC-2014-TX is a high performance and adaptive type remote etheric Bridges. Its small size, low cost, very suitable for sensitive to cost bridge application, or as a bittorrent the infrastructure of the local area network extension or block device. Continuous learning can be connected to it the MAC address of a local area network, and will be the destination address as another LAN frame forwarding. The LAN form entities as many as 10000 address, and can be updated. Filtering and forwarding the operation when maximum rate for 30000 cycles per second (line speed), buffer can accommodate 256 frames, throughput waiting for 1 frame. As extending the application or section, a filter and banned filter two work of the state, to decide whether to let all the traffic can be transmitted in a wan.
Product picture:
TIC-2014-TX  Front panel
TIC-2014-TX  Back panel(DC-48V)
TIC-2014-TX  Back panel(AC220V)
TIC-2014-TX  Front panel (Card)
Product Feature
      The upstream port is E1-switch bridge; 
      Supporting 1600 long frames, accordance with Interior Switching LinkL (ISL) protocol;
      Ethernet port: of five service modes, i.e. 10M/half-duplex, 10M/full-duplex, 100M/half-duplex, 100M/full-duplex and self-adaptive;
      Supporting local E1 port loop-back;
      The Ethernet port is self-adaptive to crossover or shoot-through cable to avoid the trouble of new wire making;
      Supporting up to four Ethernet ports, supporting port mask, hence save one Ethernet switcher for the user;
      SNMP(V1 / V2C) XVIEW management software.
Typical application:


Technical Specification

E1 interface

Interface characteristics

In accord with G.703pG.704pG.823

Interface velocity

2048Mbps50ppm

Line code type

HDB3

75 unbalanced

BNC

120 balanced

RJ45

Optical ethernet interface

Interface characteristics

In accord with IEEE802.3 10Base-T/FL
Port isolation function, port speed limit function

Connector

10/100Base-T,Auto-MDI/MDIX

Bandwidth

2048 kbit/s

Electrical characteristics

Power supply

AC220V/DC-48V

Voltage fluctuation range

AC165~265V/DC-36~-72V

Power consumption

<10W

Ambient characteristics

Service temperature

-5C~+50C

Storage temperature

-25C~+55C

Working humidity

10~90%, without condensation

EMC

In accord with GJB151A-97 and SC standard

Ordering information:

No

Model

Description

Outside dimensions

1

TIC-2014-TX-A

E1/ETH Interface Converter,AC

200mm43mm150mm

2

TIC-2014-TX-D

E1/ETH Interface Converter,DC

200mm43mm150mm

3

TIC-K2014-TX

E1/ETH Interface Converter,Card

483mm265mm230mm6U

4

TIC-K2014-TX-M

E1/ETH Interface Converter,SNMPCard

483mm265mm230mm6U

Note

Card must be installed in FOR-6U, power supply (AC/DC optional) power supply

www.cntopone.com © 2012 | Privacy Policy | Terms Of Use | User Login
B district, 4th floor,No.3 Building of Jieneng Garden, No. 391 Wen'er Road,Hangzhou.Zhejiang Province,China
310012 (86)57188480428 (86)571-88480423