+  Optical Modem
+  PDH Optical Multiplexer
+  Multi service Optical Machine
+  EOS
+  Video Optical Transmission Series
+  Interface Converter
+  E1 Channel Protection Switching
+  media Converter
+  Convergent type bridge server
+  Serial Data Server
+  Centralized platform
+  Active WDM Equipment
+  Passive WDM system
+  Auxiliary equipment
+  DTS
+  EPON
+  PTN
+  PCM
    TOM-C04E 4E1 PDH Optical Multiplexer     TIC-E102 E1 channel protection switching     TIC-2014-TX E1/ETH Interface Converter
Multi service Optical Machine
TOM-M04 Ethernet Integrated Optical Multiplexer

Product introduction:
      TOM-M04 Ethernet Integrated Optical Multiplexer is quasi-MSTP family equipment. With highly integrated optimized structure, the equipment can provide four standard E1 interfaces, a service telephone and four 10/100M Ethernet interfaces. Besides, equipment is furnished with complete alarming and network management functions. Self-check and E1 loop-back tests are also allowed. The complete alarming functions include alarms of LOS, LOF, 10-3 error codes, 10-6 error codes of lines and alarms of LOS and HDB3 encoding violation of E1 branches. Users can also configure the equipment to output aural alarm signals. The perfect designs enable it a new generation of transmission product that is stable and reliable, pleasing and delicate, economical and practical and excellent in transmission. Transmission impedance matching can be performed through simple pin-type jumpers or toggle switches. Users can also select different interface adapters for different transmission interfaces. The equipment is especially suitable for constructing flexible multi-service transmission network. Users can find its application in interoffice trunks of exchangers, transmission of LAN data, 2M accesses of leased services of large customers, etc.
      As the result of mature technology, all of the software and hardware of the high-performance equipment are of modular structure. Part of the hardware adopts ASIC circuit and integrates CPLD, CPU encoding, decoding, information insertion and alarm switching. In this way, the circuit is simplified and reliability of the equipment is improved. Besides, ASIC circuit is also introduced into part of the electrical interfaces. These interfaces are thus endowed with functions including digital sampling clock, digital smooth phase lock and encoding/decoding. As a result, indices of the family are highly above ITU-T Recommendations.
Product picture:
TOM-M04  Front panel
TOM-M04  Back panel (AC220V)
TOM-M04  Back panel (DC-48V)
TOM-M04   Back panel (AC220V/DC-48V)


TOM-KM04  Front panel

Product Featureㄩ
      Realize integrated transmission of E1 services and Ethernet services for large customers and provide 4E1ㄚ4*10/100M service access;
      Provide hundred-megabit parallel interfaces, the four Ethernet interfaces share 100M bandwidth;
      Various additional interface channels that can be used as serial interfaces, service interfaces and monitoring interfaces, etc;
      The equipment not only integrates Ethernet data transmission and exchange but also supports configuring different users in different VLAN to facilitate large customers such as business groups and organizations in different locations to establish internal data communication;
      Built-in Ethernet switching chip, which can provide 4 uplink 10M/100M interfaces to set up external data channels;
      Support VLAN partition setting of different users and provide basic safety mechanism, etc;
      Support loop-back setting of E1 interfaces;
      Provide complete warning instructions of optical interfaces, E1 interfaces and Ethernet interfaces.
Typical application:

Technical Specificationㄩ

E1 interface

Interface characteristics

In aIcIcord with G.742妳G.823

Interface velocity

2048Mbps㊣50ppm

Line code type

HDB3

75次 unbalanced/120次 balanced

DB37

Ethernet Interface

Interface characteristics

In accord with IEEE802.3ㄛ802.3u

Connector

10/100Base-TㄛAuto-MDI/MDIX

Interface type

RJ45

Optical ethernet interface

Interface characteristics

In accord with IEEE 802.3u 100Base-Fx

Interface type

Single-mode/multi-mode;
Single fiber/ multi fiber FC/SC

Central wavelength

850nm/1310nm/1550nm

Optical output power

>-9dBm

Receiving sensitivity

Single-modeㄩ<-35dBm˙
Multi-modeㄩ<-20dBm (BER≒10-11)

Transmission rate

150Mb/s

Transmission distance

Single-modeㄩ40KM﹜80KM﹜100KM;
Multi-modㄩ0‵2km

Electrical characteristics

Power supply

AC220V/DC-48V

Voltage fluctuation range

AC165~265V/DC-36~-72V

Power consumption

<10W

Ambient characteristics

Service temperature

-5∼C~+50∼C

Storage temperature

-25∼C~+55∼C

Working humidity

10~90%, without condensation

EMC

In accord with GJB151A-97 and SC standard

 
Ordering information:

No

Model

Description

Outside dimensions

1

TOM-M04-75-A

4*electrical Ethernet,75次,AC

440mm℅44mm℅230mm

2

TOM-M04-75-D

4*electrical Ethernet,75次,DC

440mm℅44mm℅230mm

3

TOM-M04-75-AD

4*electrical Ethernet,75次,AC+DC

440mm℅44mm℅230mm

4

TOM-M04-75-M-AD

4*electrical Ethernet,75次, SNMP AC+DC

440mm℅44mm℅230mm

5

TOM-M04-120-A

4*electrical Ethernet,120次,AC

440mm℅44mm℅230mm

6

TOM-M04-120-D

4*electrical Ethernet,120次,DC

440mm℅44mm℅230mm

7

TOM-M04-120-AD

4*electrical Ethernet,120次,AC+DC

440mm℅44mm℅230mm

8

TOM-M04-120-M-AD

4*electrical Ethernet,120次, SNMP AC+DC

440mm℅44mm℅230mm

9

TOM-KM04-75

1*electrical Ethernet,75次, (Card)

483mm℅265mm℅230mmㄗ6Uㄘ

10

TOM-KM04-75-M

1*electrical Ethernet,75次,SNMP(Card)

483mm℅265mm℅230mmㄗ6Uㄘ

11

TOM-KM04-120

1*electrical Ethernet,120次, (Card)

483mm℅265mm℅230mmㄗ6Uㄘ

12

TOM-KM04-120-M

1*electrical Ethernet,120次,SNMP(Card)

483mm℅265mm℅230mmㄗ6Uㄘ

Note

 

www.cntopone.com © 2012 | Privacy Policy | Terms Of Use | User Login
B district, 4th floor,No.3 Building of Jieneng Garden, No. 391 Wen'er Road,Hangzhou.Zhejiang Province,China
310012 (86)571ㄜ88480428 (86)571-88480423