System Introduction£º
TIC-SR242, based on E1 transmission, adopting special integrated circuit design in large scale, is mainly applied in dynamic environment monitor of base station and transmission of network management etc. It supports point to point network and star type network. It provides various interface types and takes up less resources, only 64K for each site.
TIC-SR242 equipment pack the received serial data per protocol TCP/IP, then it is conveyed to centre analysis equipment via E1 channel and handled with at centre server after converging by Ethernet switch£»control information of centre server is addressing conveyed to corresponding TIC-SR242 in the form of protocol TCP/IP and serial data analyzed is conveyed to monitor equipment.
Product Pictures£º
Front panel
Product Feature£º
Apply large-scale special-purpose integrated circuit design in accord with the requirements of industrial grade standards;
Provided with 1¡ÁRS422, 2¡ÁRS232, 2¡ÁEthernet interfaces and 2¡ÁE1 (Sub E1 & UP E1) interfaces;
To manually set the time slots to be occupied;
Provided with 2¡Á framing type E1 interfaces, with the interface connector using BNC or RJ45;
Shoot-through protection function in case of power failure between the two E1 (Sub E1 & UP E1) interfaces;
Provided with two change-over Ethernet interfaces;
Surge protection and lightning protection provided for E1 interface, Ethernet interface, RS232 interface and RS422 interface;
Direct viewing status indications to facilitate maintenance personnel to detect and remove problems;
Support command line interface from HyperTerminal and central network management to facilitate configuration and operation of the system.
Typical application:
